|
UBA Console Software
The UBA5
comes with UBA Console software. This software
allows full control over the UBA5 enabling unprecedented flexibility in designing
a battery analysis.
The anaysis results from a NiCd test is shown below.
The battery was fully charged before the test. The battery was discharged 559mAh
before it reached the cutoff voltage. Thus the battery is functioning at 93% rated
capacity which is acceptable for a used NiCd battery.

Graphical Battery Analysis Routine
UBA Console includes advanced battery analysis
design capability which uses a grapical based design environment.
This allows you to design your battery analysis using charge and discharge modules
and loops and subroutines.
Or use the analysis routines that come with your UBA.
The analysis routine can be as simple as this NiMH Discharge and Charge routine:
Or as complicated as this lithium ion camera load simulation routine that simulates
the load that a camera battery will experience taking 200 pictures and then being recharged.
This charge/discharge cycle is reapeated until the battery can no longer provide the power for the 200 pictures.
This routine consists of this main routine:
and this subroutine:
[Back]
|